1. While examining the output of a show run command on the Cisco MDS 9000 Series, you notice that the statement interface GigabitEthernet2/1.2 appears in the output. What does this mean?
Select the best response.
A. It refers to the second FCIP tunnel that is configured on port GigabitEthernet2/1.
B. It refers to a VLAN subinterface on port GigabitEthernet2/1.
C. It means that port GigabitEthernet2/1 is assigned to VSAN 2.
D. It is a mistake in the interface configuration.
Answer: B
2. The HBA on your storage server only supports the NL_Port mode. Which interface type on the Cisco MDS 9000 Series fabric switches can support this HBA?
Select the best response.
A. F
B. TE
C. FL
D. N
E. E
Answer: C
3. For purposes of granting restricted access to statically configure iSCSI virtual targets, which three of these can be used to identify iSCSI initiators? (Choose three.)
Select 3 response(s).
A. iSCSI node name
B. host name
C. IPv4 address and subnet
D. MAC address
E. IPv6 address
F. iSCSI WWN
Answer: ACE
4. What is a benefit of enhanced zoning?
Select the best response.
A. fabric locked during configuration changes
B. larger zoning database size
C. database rollback in case of failure
D. zones allowed to span VSANs
Answer: A
5. How many ports are addressable on a fabric arbitrated loop?
Select the best response.
A. 126
B. 127
C. 255
D. 256
Answer: B
6. Which three of the following are possible reasons why a line card module does not come online? (Choose three.)
Select 3 response(s).
A. Port indexes have been taken offline.
B. Available port indexes are noncontiguous.
C. Not enough power is available in the chassis.
D. An invalid interoperability mode has been configured.
E. Unsupported SFPs have been installed.
F. Not enough port indexes are available.
Answer: BCF
7. Which of the following tools would you use to view SCSI error count statistics?
Select the best response.
A. Cisco Performance Manager
B. RMON
C. Cisco Traffic Analyzer
D. Cisco Fabric Analyzer
Answer: C

http://www.test4actual.com/642-359.html

8. Why would you use the fcanalyzer command?
Select the best response.
A. to ensure that Fibre Channel configuration settings are synchronized across all switches in the fabric
B. to identify common configuration errors in the fabric
C. to nondisruptively capture and decode Fibre Channel control frames
D. to decode and analyze Fibre Channel frames and ordered sets on a link
Answer: C
9. Which two features help you verify connectivity between host and storage devices? (Choose two.)
Select 2 response(s).
A. fcanalyzer
B. Cisco Traffic Analyzer
C. End-to-End Connectivity Analysis
D. Zone Merge Analysis
E. fcping
Answer: CE
10. Which feature detects hardware faults and attempts recovery actions?
Select the best response.
A. Switch Health Analysis
B. Fabric Configuration Analysis
C. Online Health Management System
D. End-to-End Connectivity Analysis
E. Cisco Fabric Services
Answer: C
11. A customer has reported performance degradation in the SAN. The system administrator would like to track read-write I/O and LUN use on several devices. The devices are directly connected to various switches and belong to different VSANs. The administrator wants to gather information for the last 72 hours.
Which of the following Cisco MDS 9000 Series tools is needed to track SCSI I/O and LUN statistics?
Select the best response.
A. Cisco Fabric Manager
B. Cisco Traffic Analyzer and PAA
C. Cisco Performance Manager
D. Cisco Fabric Analyzer
Answer: B
12. Which services are supported by a Cisco NX-OS AAA configuration?
Select the best response.
A. Telnet, SSH, FM and DM logins
B. Console login, FC-SP authentication, FTP
C. FC-SP authentication, FM and DM logins, TFTP
D. iSCSI authentication, FTP, FC-SP authentication
Answer: A
13. Which two Cisco MDS 9000 Series Switches are used in small- and medium-sized SAN topologies? (Choose two.)
Select 2 response(s).
A. Cisco MDS 9124
B. Cisco MDS 9222i
C. Cisco MDS 9506
D. Cisco MDS 9509
E. Cisco MDS 9513
Answer: AB
14. Which second-generation Fibre Channel module offers a full 4Gb/s line rate on all ports?
Select the best response.
A. 12-port 1/2/4 Gb/s Fibre Channel module
B. 24-port 1/2/4 Gb/s Fibre Channel module
C. 24-port 1/2/4/8 Gb/s Fibre Channel module
D. 48-port 1/2/4 Gb/s Fibre Channel module
Answer: A
15. Which Cisco MDS 9000 Series Switch has non-field-replaceable fans?
Select the best response.
A. Cisco MDS 9124
B. Cisco MDS 9134
C. Cisco MDS 9222i
D. Cisco MDS 9506
Answer: A